English 
Deutsch 
Threaded body cylinders, with stroke limiter
Threaded body cylinder,
piston diameter 20 mm,
piston stroke 4 mm,
with NBR wiper
Threaded body cylinder,
piston diameter 25 mm,
piston stroke 4 mm,
without wiper
Description
These threaded body cylinders are a space saving solution as clamping and lock cylinders. Suitable as a construction module for a wide variety of tasks. This cylinder is for example also ideally suited for press clamping devices. The cylinder distinguishes by its compact construction. Due to the internal stroke limiter, the cylinder can also be operated without counter clamping. The piston rod end is crowned. The threaded body cylinder operates hydraulically only single-acting. As a result, only definite extraction times are given. The reset is effected by means of a built-in compression spring. For that reason, the reset time cannot be precisely determined. Hydraulic oil is supplied through drilled channels.
After the cylinder has been installed, it is to be secured in the thread M45x1.5 by means of a threaded pin M4x6. The scope of supply
includes this threaded pin with internal hexagon and chamfer point.
-
suitable as clamping cylinder and as lock cylinder
-
usable without counter clamping surface
-
with internal stroke limiter
-
with large spherical piston surface
-
without or with soft wiper available
-
standard cylinders and special designs available
