Hero_Tablet-Mobile_240-70_swivel clamp 70 bar

240-70 Swing clamps double-acting, for low pressure, pmax. 70 bar

This hydraulic swivel clamping cylinder works as a double-acting pull cylinder, whereby part of the stroke is used to swivel the piston. The variant without swivel angle functions as a pure pull cylinder with a linear stroke. The swing clamps are equipped with a reinforced swing mechanism.

Configure Data sheet

To ensure a long service life, the swing clamp cylinders are equipped with an integrated metal wiper as standard. The cylinders are equipped with a pipe thread and O-ring flange connection for drilled channels to supply pressure oil.

Right or left swivel versions with a 90° swivel angle or pull cylinders without a swivel angle (0°) are available. The permissible operating pressure depends on the clamp length. Special clamps can be fitted in addition to the standard clamp. The maximum operating pressure of 70 bar does not apply to all clamps.

Protective metal scraper included
Reinforced swivel mechanism
Oil supply via holes or threaded connections
Easy loading and unloading of the device
Standard and special clamping arms available

Operating pressure:	pmax. 70 bar
Mode of operation:	double-acting
Swivel angle:	0°, 30°, 45°, 60° and 90°
Type of construction:	A (top flange)
Piston Ø:	37, 44 and 51 mm
Clamping stroke:	8 or 10 mm
Mounting:	cylindrical
Overload protection:	without
Position control:	without
Oil connection:	Pipe thread or O-ring flange