220-6 Hollow piston cylinder with female thread, single and double-acting, pmax. 500 bar, with metal wiper
Hollow piston cylinders are used in conjunction with mechanical clamping elements in hydraulic clamping devices as tension and compression cylinders.
Info
The piston has a through-hole with thread, which can be used for screwing in tie rods, for example. The integrated metal wiper protects the piston from damage caused by metal chips, thus increasing the availability and service life of the cylinder. The external thread of the housing allows a wide range of installation options, including the use of locknuts.
HYDROKOMP offers the hollow piston cylinders in single-acting with spring return and double-acting versions. The hollow piston cylinders are equipped with G1/4 threaded connections for pressure oil supply.
Operating conditions:
With single-acting hollow piston cylinders, the penetration of foreign bodies and liquids into the spring chamber must be prevented by preventive cylinder arrangement or by covering. If required, a ventilation line can also be connected. To ensure that the threads are not damaged during use, the locknuts must always be tightened in accordance with the load. The user must ensure that only tie rods and screws made of materials with a strength class of at least 10.9 are used. This applies in particular to maximum operating pressures of 350 to 500 bar.
With single-acting hollow piston cylinders, the penetration of foreign bodies and liquids into the spring chamber must be prevented by preventive cylinder arrangement or by covering. If required, a ventilation line can also be connected. To ensure that the threads are not damaged during use, the locknuts must always be tightened in accordance with the load. The user must ensure that only tie rods and screws made of materials with a strength class of at least 10.9 are used. This applies in particular to maximum operating pressures of 350 to 500 bar.
Special features:
-
Can be used as a pull and push cylinder
-
Piston with through bore
-
Use of tie rods possible
-
Wide range of installation options
-
Chip protection thanks to integrated metal scraper
-
Standard cylinders and special variants available
| Operating pressure: | pmax. 500 bar |
|---|---|
| Mode of operation: | single/double-acting |
| Piston Ø: | 20, 25, 32, 40, 50, 63, 80 mm |
| Stroke: | 6, 8, 10, 12, 16, 20, 32, 40 mm |
| Thrust: | from 2 kN at 100 bar to 153 kN at 500 bar |
| Restoring force: | from 90 N to 950 N |
| Oil connection: | Thread G1/4 |
| Seal type: | NBR -10 °C to +80 °C |
| Wiper: | Soft wiper and metal wiper |
Design variants:
Hollow piston cylinder
with screw-in thread and integrated flange plate,
locknut available as accessory
with screw-in thread and integrated flange plate,
locknut available as accessory
(Fig. fastening options)
Hollow piston cylinder
with screw-in thread, flange plate and locknuts available as accessories
with screw-in thread, flange plate and locknuts available as accessories
(Fig. mounting options)