Hero_Tablet-Mobile_240-0_Span clamp Swivel clamp

240-0 Clamping arm for swing clamps Various designs, also as special versions

Hydrokomp clamps are manufactured in-house. For special requests, we can implement your wishes directly.

Configure Data sheet

Info

HYDROKOMP offers a wide range of standard clamps as accessories for its swing clamp cylinders. The portfolio includes single clamping arms and double clamping arms with and without pressure screws. Blanks for the production of individual special clamping arms are also available.

Variant designation:

  • for cone mounting ( SPK)
  • for pendulum eye ( SPP)
  • for clevis ( SPG)
  • for cylinder mount ( SPZ)

Design:

024000_clamp_A

024000_clamping_iron_C

024000_clamping_iron

024000_clamping_iron_E

024000_clamping_iron_J

024000_clamp_B

024000_clamping_iron_F

024000_clamping_iron_G

024000_clamping_iron_H

Installation instructions:

024000_Montage_falsch
024000_Montage_richtig
When fitting the clamps, ensure that no torque is transferred to the piston rod. To do this, hold against the clamping arm when tightening or loosening the fastening screw (see illustration).

The function of swing clamps with overload protection must first be tested. To do this, turn the piston until you feel the overload protection engage. The swing clamps have three engagement points at 120° intervals.

As a rule, the clamp is mounted in a depressurized state. However, if the clamp is to be positioned in an exact clamping position, you must pressurize the swing clamp at connectionA and allow the piston to retract. Then position the clamping arm in the intended clamping position on the clamping arm holder.

After positioning the clamping arm on the clamping arm holder, unscrew the fastening screw by hand. Then tighten the fastening screw with a wrench.
After a few clamping cycles, the torque on the fastening screw must be checked again. This will prevent the clamp from loosening.

Configurator

Request now

Get started now and make a personal appointment!

We will be happy to advise you by telephone:
+49 (0) 6401 - 225 999-0

Or make an appointment with us.
Contact us