240-60 Swing clamp plug-in, with overload protection, double-acting, pmax. 500 bar

For a long service life, the cylinders are equipped with integrated metal wipers as standard. The cylinders are equipped with a pipe thread or O-ring flange connection for drilled channels to supply pressure oil. Right or left swivel versions with various standardized swivel angles are available. The integrated overload protection protects the swivel mechanism from damage if the swivel process is blocked or the clamping arm is mounted incorrectly.

Operating conditions:
If the permissible volume flow is exceeded, a throttle check valve must be fitted in the pressure oil inlet. When installing the clamping arm, it must be held in place to prevent damage to the ball guide.
Variants with swivel angles of 0°, 30°, 45°, 60° and 90° are available. The permissible operating pressure depends on the clamping arm length. Variants with other swivel angles can be supplied as special designs. Special clamping arms can be fitted in addition to the standard clamping arm. The maximum operating pressure of 500 bar does not apply to all clamps. Information on the permissible operating pressure can be found in the diagrams in the data sheet. The safety instructions for swing clamp cylinders in our catalog and the applicable accident prevention regulations must be observed.

Ensure that the oil ducts are clean during installation.