Hero_Tablet-Mobile_200-5 Block cylinder Piston with external thread

200-5 Block cylinder with outer piston rod thread, with metal wiper, double-acting, pmax. 500 bar

This double-acting block cylinder is ideal for applications where linear movements are generated hydraulically and exact stroke times are essential.

Configure now Download data sheet

Typical areas of application for the block cylinder can be found in plant engineering, mold making, general mechanical engineering, fixture construction and tool making. The compact cubic design and the transverse groove facilitate mounting and guarantee use under high operating pressure. HYDROKOMP offers different pressure oil supply variants.

In addition to the double seal on the rod diameter, the block cylinders have an additional metal wiper. The metal wiper prevents metal chips from entering the soft wiper and thus ensures low-leakage continuous operation. The piston rod of the block cylinders are equipped with an external thread. This allows, for example, rod ends and other fastening elements to be fitted.

HYDROKOMP offers the block cylinder in five standard sizes. Special versions and other strokes are available.

Ideal for low-leakage continuous operation
Space-saving installation option
4 mounting options
With metal scraper as standard
External piston thread for accessories
Standard cylinders and special variants available
allows exact lifting times

Operating pressure:	pmax. 500 bar
Mode of operation:	double-acting
Piston Ø:	25, 32, 40, 50 and 63 mm
Stroke	50 and 63 mm
Thrust:	from 4.9 kN at 100 bar to 156 kN at 500 bar
Pulling force:	from 2.9 kN at 100 bar to 93 kN at 500 bar
Oil connection:	Thread G1/4 or G1/2 or O-ring flange
Seal type:	NBR -10°C to +80°C, FKM up to 150°C
Wiper:	Soft wiper and metal wiper