Hero_Tablet-Mobile_210-3 screw-in cylinder with sealing edge

210-3 Screw-in cylinder with sealing edge with wiper, single-acting, pmax. 500 bar

The single-acting screw-in cylinders are screwed directly into the fixture body. They have a wiper and a return spring as standard.

Configure Data sheet

The single-acting screw-in cylinders are screwed directly into the fixture body. These cylinders have been designed for maximum operating pressures of up to 500 bar. They have a wiper and a return spring as standard. The crowned piston rod in combination with the compact design ensures space-saving installation in the device. Boreholes allow the pressure medium to be fed in without exposed supply lines and external screw connections. The piston is retracted to the depressurized starting position by an integrated return spring. The piston is retracted to the depressurized starting position by an integrated return spring. The screw-in cylinders cannot be loaded when the piston is retracted.

Sealing through metallic sealing edge
crowned piston surface
with integrated scraper
Pipe-less oil supply
5 sizes as standard
High clamping forces and force density
Standard cylinders and special variants available

Operating pressure:	pmax. 500 bar
Operating principle:	single-acting with spring return
Piston Ø	8, 12, 16, 25 and 32 mm
Stroke:	4, 6, 12 and 16 mm
Thrust force:	from 0.5 kN at 100 bar to 40 kN at 500 bar
Restoring force	from 25 N to 183N
Oil connection:	drilled channels
Wiper:	Soft wiper
Seal type:	NBR -10°C to +80°C, FKM up to 150°

210-3 Screw-in cylinder with sealing edge with wiper, single-acting, pmax. 500 bar

Info

Special features:

Practical example:

Configurator

Get started now and make a personal appointment!