Hero_Tablet-Mobile_220-2 universal-cylinder-for-changing-workpiece-sizes

220-2 Universal cylinder with spring return, single-acting, pmax. 500 (200) bar

With the universal cylinder, variable workpiece sizes can be processed in a clamping device.

Configure now Download data sheet

Info

The universal cylinder is equipped with a Seeger L-ring. This allows it to be installed directly into the fixture body. Thanks to its design, the installation depth can be adjusted in 10 mm increments. The cylinder with piston Ø 50 mm is equipped with a G1/8 bleed screw.

Important note:
No coolant or cutting fluid may enter the spring chamber. The cylinders must be arranged in such a way that the ingress of liquids via the sintered metal air filter is prevented. Alternatively, protection can be provided by a suitable cover. Sealing kits including fastening material are available as spare parts.

Special features:

  • Ideal for changing workpiece sizes
  • Any installation position possible
  • Installation depth adjustable in 10 mm steps
  • Easy to replace
  • Standard cylinders and special variants available

Operating pressure: pmax. 500 bar
Operating principle: single-acting, with spring return
Piston Ø: 10, 25, 40 and 50 mm
Stroke: 20, 22, and 50 mm
Thrust force: from 0.7 kN at 100 bar to 78 kN at 500 bar
Restoring force: from 28 N to 390 N
Oil connection: Thread G1/4
Seal type: NBR -10°C to +80°C
Wiper Soft wiper and metal wiper

Application
example

universal-cylinder-for-changing-workpiece-sizes-application-example-220-2
1. cylinder holder
(not included in the scope of delivery)
2. spacer ring
(not included in the scope of delivery)

Configurator

Request now

Get started now and make a personal appointment!

We will be happy to advise you by telephone:
+49 (0) 6401 - 225 999-0

Or make an appointment with us.
Contact us