Hero_Tablet-Mobile_200-10-block-cylinder-with-end-position-control

200-10 Block cylinder with end position control with end position control, double-acting, pmax. 500 bar, with metal wiper

When time or cycle-based clamping/unclamping processes are essential, the advantages of this block cylinder with end position monitoring come into play. It is ideal for use in automated systems.

Download data sheet

The position of the cylinder piston is monitored using the end position control. The block cylinder has two inductive sensors for this purpose. These are fitted in the housing at the height of the end positions of the piston. Depending on the version, the sensors are equipped with LEDs. Suitable plugs must be ordered separately. Angled and straight plugs are available. Both versions are supplied with a 2 m connection cable. The compact cubic design and the cross groove make it easier to mount the block cylinder and guarantee high operating pressures.

The block cylinder is fitted with a double hydraulic seal as standard, which guarantees extremely low-leakage continuous operation. The block cylinder is also equipped with a metal scraper, which prevents metal chips from entering the soft scraper and thus significantly increases availability. The block cylinder has an internal piston rod thread.Pressure screws, for example, can be securely screwed into the internal thread.

HYDROKOMP offers a cataloged standard range with 9 sizes and different pressure oil supply variants. We also design and manufacture customer-specific special variants.

Ideal for automated systems
Space-saving installation option
3 mounting options
With metal scraper as standard
High monitoring accuracy
Standard cylinders and special variants available

Operating pressure:	pmax. 500 bar
Mode of operation:	double-acting
Piston Ø:	16, 20, 25, 32, 40, 50, 63, 80 and 100 mm
Stroke:	numerous strokes from 16 to 160 mm
Thrust:	from 2 kN at 100 bar to 392 kN at 500 bar
Pulling force:	from 1.2 kN at 100 bar to 237 kN at 500 bar
Oil connection:	Thread G1/4 or G1/2 or O-ring flange
Seal type:	NBR -10°C to +80°C, FKM up to 150°C
Wiper:	Soft wiper and metal wiper