Threaded body cylinders, with sealing edge

Single-acting threaded body cylinders have to be screwed-in right into the fixture body. Theaded body cylinders have been designed for a maximum operating pressure of up to 500 bar.  As standard, they are equipped with a wiper and a reset spring. The crowned piston rod in combination with the compact design guarantees space-saving installation in the fixture. Bores allow for easy feed of the pressure medium without exposed feed lines and external screwed connections. An integrated reset spring pulls the piston back into the non-pressure initial condition. With retracted pistons the threaded body cylinders can not be charged.

Sealing:

Threaded body cylinders by HYDROKOMP are metallically sealed by the sealing edge profiled to the cylinder. For that, a rectangular face grinded mount surface within the fixture body is absolutely essential.

Threaded body cylinders with a piston Ø of 32 mm are sealed by a sealing edge (see figure).

 

• sealing by metallic sealing edge

• spherical piston surface

• with integrated wiper

• space-saving installation

• oil feed without piping

• standard cylinders and special designs available

Application example:

Operating pressure:

pmax. 500 bar

 

Operating method:

single-acting with reset spring

 

Piston Ø:

8, 12, 16, 25 and 32 mm

 

Stroke:

4, 6, 12, and 16 mm

 

Thrust force:

from 0,5 kN at 100 bar up to 40 kN at 500 bar

Oil supply:

drilled channels

Sealing:

NBR -10°C up to +80°C, FKM up to 150°

Wiper:

soft wiper

Data sheet (PDF):

 

For technical details and dimensional drawings download the current data sheet.

 

Product configurator:

With our product configurator, you can put together your desired products step by step. Then the following options are available:

 

• generate an order number
• request a quote
• download of 3D models